For example; if an order consists of a coffee and a kitchen item, and if you only have one printer, then both of these items would print on the same docket. However, if you want a coffee docket and a kitchen docket separately, this is easy to do. Once you have set up the printer, take note of it's settings.
Above we can see that there are three printers set up: receipt,
kitchen and coffee. In reality, we're only using one single printer to produce
several separate dockets that can be passed onto your different staff.
The
receipt printer uses com1 so we need to make sure that the other printers we
want are also set to com1. All the other settings should also be identical.
Before we'll notice any difference, we must also setup which items
should print from which printer. See the Printer Setup section for instructions
on how to do this.